Home / Blog

News26 October 20264 min readBy Western Co Transport

Heavier axles, longer combinations: what changed for WA operators on 1 August 2026

On 1 August 2026, revised national mass and dimension limits came into effect, and Main Roads WA Heavy Vehicle Services moved to line up its Orders and Permits with them. If you move plant, equipment or site facilities in Western Australia, a few of these changes are worth knowing about.

The changes at a glance

ItemBeforeFrom 1 August 2026
Tandem axle group, general mass limit16.5t17t
Tri axle group, general mass limit20t21.5t*
Single steer axle (tyres 315mm or wider)-up to 7.0t
Twin steer axle group (tyres 275mm or wider)-up to 11.5t
General length limit, certain combinations19m20m
Rigid truck and tag trailer tow mass ratio1 : 11 : 1.3

*Main Roads' 30 July 2026 update gives 21.5t for tri axle groups. An earlier May notice quoted 21t, so check the current table before you rely on the number.

What stands out

The higher tandem and tri axle limits apply without the need for Mass Management Accreditation, according to Main Roads. The steer axle figures apply to trucks that meet the Euro VI / ADR 80/04 standard, and the length increase applies to certain vehicle combinations, with rear overhang and S-dimension limits also rising subject to specific requirements.

Permit fees

Main Roads has said that operators renewing permits that include Modified Mass, such as AMMS Period Permits, will need less Modified Mass under the new limits, so the fee should drop. Renewing an existing permit keeps the previous fee. To get the lower fee, you need to lodge a new application through MOVES or the online application form.

What it means when you are pricing a move

Higher general limits do not mean every job gets cheaper or every truck can carry more. The limit that applies depends on the actual vehicle, its axle configuration, its tyres and the permit it is running under. When you are asking for a quote on a plant or equipment move, it is worth asking:

  • What is the weight and overall dimension of each item, including attachments?
  • Which vehicle and trailer combination is planned, and under which permit or order?
  • Does the new limit change the number of trips or the type of truck needed?
General information only. This article summarises Main Roads WA notices and is not legal or compliance advice. Always check Main Roads' current Order and Permit conditions, or call the Heavy Vehicle Services helpdesk on 138 486, before relying on a limit for a specific job.